Existing-installation upgrade guide
Which cameras work with Reolink RLN8-410?
The useful question is not simply whether a camera says “Reolink compatible”. It is whether the exact camera is documented for the RLN8-410 scope you actually own.
CameraCompat keeps hardware and firmware scope visible because the same recorder family can span multiple revisions and support boundaries.
Before buying a replacement or expansion camera, identify the recorder’s Hardware No. and current firmware. Do not assume every unit named RLN8-410 has the same compatibility envelope.
Reviewed RLN8-410 camera relationships
These entries come from CameraCompat’s published relationship data. UNKNOWN means the reviewed evidence is not sufficient for an overall conclusion.
Reolink RLC-1224A
Partially compatibleView exact compatibility reportReolink Video Doorbell PoE
Partially compatibleView exact compatibility reportReolink Duo 3 PoE
Not reviewed in CameraCompat yetCurrent RLN8-410 hardware-generation reference
The table below summarizes Reolink’s current official hardware guide. It is editorial context for purchase decisions, not a CameraCompat compatibility verdict for every camera.
| Hardware | Published wired-camera envelope | Battery-camera support | Person/vehicle detection | Channels / camera limit | Max single HDD |
|---|---|---|---|---|---|
| H3MB02 | Up to 5MP wired-powered cameras; Duo and TrackMix excluded. | Not supported. | No. | 8 channels / 8 cameras. | 4 TB |
| H3MB16 (RLN8-410-E) | Up to 8MP wired-powered cameras; Duo and TrackMix excluded. | Not supported. | No. | 8 channels / 8 cameras. | 4 TB |
| H3MB18 | Up to 8MP wired-powered cameras plus 1210A/1220A. Duo 3 PoE/WiFi is limited to 6MP for preview, playback and recording; Elite 16MP is not supported. | Some battery cameras from NVR firmware v3.5.1.368_25010326. | Yes. | 8 channels / 8 cameras. | 6 TB |
| N2MB02 | Up to 8MP wired-powered cameras plus 1210A/1220A. Duo 3 PoE/WiFi is limited to 6MP for preview, playback and recording; Elite 16MP is not supported. | Some battery cameras from NVR firmware v3.5.1.368_25010326. | Yes. | 8 channels / 8 cameras. | 6 TB |
| N3MB01 | Up to 8MP wired-powered cameras plus 1210A/1220A. Duo 3 PoE/WiFi is limited to 6MP for preview, playback and recording; Elite 16MP is not supported. | Some battery cameras from NVR firmware v3.5.1.368_25010352. | Yes. | 12 channels / up to 8 cameras in the current Reolink channel table. | 6 TB |
| N7MB01 | Up to 16MP wired-powered cameras plus OMVI-series cameras. | Some battery cameras from NVR firmware v3.5.0.321_24060733. | Yes. | 12 channels / up to 8 wired + 4 battery cameras, or 12 battery cameras. | 8 TB |
| NVR_NNT3NA78P | Up to 16MP wired-powered cameras plus OMVI-series cameras. | Some battery cameras are supported; Reolink’s current summary does not give one minimum firmware in this row. | Yes. | 12 channels / up to 8 wired + 4 battery cameras, or 12 battery cameras. | 8 TB |
Reolink’s firmware page currently lists July 2026 firmware v3.6.5.562_26062933 for N7MB01 and v3.6.5.562_26062955 for NVR_NNT3NA78P.
Why the hardware revision matters
Reolink publishes hardware-version-specific NVR guidance. CameraCompat therefore treats revision scope as part of the relationship whenever the source does. This is especially important when adding newer high-resolution, multi-lens or feature-rich cameras to an older recorder.
Channel count is a separate constraint
Network topology and camera compatibility do not automatically expand recorder capacity. Before adding cameras through a PoE switch or LAN, verify the channel limits for the exact NVR hardware and configuration.
Before you buy another camera
- Find the RLN8-410 hardware revision.
- Update to an official firmware intended for that exact hardware revision.
- Check the exact camera family and maximum resolution you intend to add.
- Check special cases such as Duo, TrackMix, doorbells and battery-powered models.
- Check the feature you actually need, not only whether video can be displayed.
- Open the CameraCompat relationship and original evidence before purchasing.
Why this page exists
A recurring source of confusion is buying by the RLN8-410 family name while overlooking the hardware revision. This guide is deliberately revision-aware so a broad product label does not become a false guarantee.
What the reviewed data supports
Compatibility statuses, feature states and product capability values shown on this page come from CameraCompat's reviewed public data.
What remains uncertain
Unlisted models, missing capabilities and absent relationships remain unresolved. They are not inferred from a sibling model, a protocol logo or a brand-wide assumption.
Frequently asked questions
Does every RLN8-410 support the same cameras?
No such universal claim is made. Reolink publishes hardware-version-specific guidance, and CameraCompat preserves hardware scope when it is part of the evidence.
Can I add a PoE switch to support more cameras?
A PoE switch can change power and network topology, but recorder channel limits and camera support still need to be checked separately.
Does RLN8-410 support Duo or TrackMix cameras?
Support depends on the exact recorder and camera scope. Use the reviewed relationship when available rather than applying one answer to every RLN8-410 revision.
Can I use a third-party camera?
CameraCompat only states third-party compatibility when reviewed evidence supports the exact path. A generic ONVIF claim is not treated as full recorder compatibility.